|
|
|
Non Metallic Liquid Tight Flexible Conduit and Fitting System, Straight and 90° Sweep Fittings
SUITABLE FOR
INDOOR/OUTDOOR USE: HVAC Equipment, Machine Tools Marine Equipment Motors and Controls Pumps, Refrigeration Equipment Pool and Spas
|
|

|
|
|
Type UL Non-Metallic Liquid Tight Conduit
| 3/8" thru 2" trade sizes. |
| Available in gray and black. |
| • UL List per UL Standard for Safety 1660; UL File #E121096. |
| Use with nylon Heyco-Flex Connectors; Snap-in, Straight or Sweep. |
| Resists corrosion, abrasion, oil,water, acid, metal shavings, and rough environments. |
• Temperature ratings: 80°C (176°F) DRY 70°C (160°F)
OIL Resistance, 60°C (140°F) WET locations. |
| Passes submersion test of 70 PSI. |
| Quick installation; cuts with utility knife, PVC cutter or Heyco cutting tool (#8340). |
| Integral rigid and flexible PVC construction. |
|
Part
No. |
Trade
Sizes
Inches |
Coil
Lengths
in Feet |
Approx. Weight per
100 Feet |
A
Outside Diameter |
B
Inside Diameter |
| in. |
mm. |
in. |
mm. |
| 8430 |
3/8 |
100 |
12.8 |
.700 |
17,8 |
.494 |
12,5 |
| 8431 |
1/2 |
100 |
13.3 |
.830 |
21,0 |
.632 |
16,1 |
| 8432 |
3/4 |
100 |
16.3 |
1.040 |
26,4 |
.830 |
21,1 |
| 8433 |
1 |
100 |
25.9 |
1.303 |
33,1 |
1.054 |
26,8 |
| 8434 |
1-1/4 |
100 |
33.9 |
1.645 |
41,8 |
1.395 |
35,4 |
| 8435 |
1-1/2 |
50 |
44.6 |
1.883 |
47,8 |
1.588 |
40,3 |
| 8436 |
2 |
50 |
61.7 |
2.358 |
59,9 |
2.033 |
51,6 |
Straight & 90º Angle Connectors
| US Patent No. 4,900,068; Foreign Patents |
| - UL File# E-28430. SA File # LL-84579 and # LR-81067. |
| - Straight and 90º fitting bodies and nuts are made of polyamide “Nylon” 6/6. |
| - Protection class IP68 per DIN 40050 up to 70 psi (5 bar) water pressure. |
| - Resists water,weak acids, gasoline, alcohol, oil, grease, and common solvents. |
| - Connectors must be ordered in standard quantities. |
- No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the
ferrule, then tightens the dome sealing nut. This completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole). |
|
| Straight Connectors |
90º Angle Connectors |
| Part No. |
Trade Sizes
in. |
Standard Carton Quantity |
Approx. Weight per 100 pcs. |
Part No. |
Trade Sizes
in. |
Standard Carton Quantity |
Approx. Weight per 100 pcs. |
| Black |
Gray |
Black |
Gray |
| 8400 |
8401 |
3/8 |
500 |
5.0 |
8423 |
8424 |
3/8 |
250 |
6.5 |
| 8402 |
8403 |
1/2 |
500 |
4.8 |
8425 |
8426 |
1/2 |
250 |
5.3 |
| 8404 |
8405 |
3/4 |
200 |
7.0 |
8427 |
8428 |
3/4 |
250 |
9.4 |
| 8406 |
8407 |
1 |
200 |
11.8 |
8412 |
8413 |
1 |
100 |
16.3 |
|
Limited Warranty
The merchandise or products sold or distributed by Kaf-flex are warranted to our customers to be free from defects in material and workmanship at the time of shipment by us. Merchandise damaged as a result of carelessness, improper handling, rodents, insects (termite) or misapplication is specifically excluded from this warranty, as are all implied warranties, on any consequential injury, property damage and/or loss of profit which may be claimed to have occurred though the sales or use of any such product. All warranty claims shall be made within six (6) months after we have shipped the merchandise. Our liability hereunder is limited to the purchase price of any merchandise proving defective, or, at our option, to the replacement of such merchandise upon its authorized return to us. This warranty is in lieu of and excludes all other warranties, expressed, implied, statutory, or otherwise created under applicable law including, but not limited to, the warranty of mechantablility and the warranty or fitness for a particular purpose. In no event shall we be liable for special, incidental, or consequential damages, including loss of profits.
|
"Quick Twist" Connectors
| • Snap-in Connectors are UL approved for use with Heyco-Flex II tubing. NPT-threaded connectors are UL approved for use with Heyco-Flex I conduit. |
| • Low cost electrical connector in three sizes (3/8˝, 1/2˝, 3/4˝). |
| • One piece solution for smooth internal surfaces for easier wire routing,protection and installation around corner angles. |
| • All nylon construction is resistant to salt water,weak acids, gasoline, alcohol,oil, grease and common solvents. |
| • Easy, permanent assembly: the installer "twists" the Tubing over the Connector ferrule, until the Tubing "clicks" into place. It’s that easy! |
| • No tools needed for installation. |
| • Unique locking fingers accommodate various chassis thicknesses. |
• Suitable for a wide array of electrical application:
- Commercial and Industrial HVAC systems
- Motorized Equipment
- Enclosed Power Sources
- Garage Door Openers
- Major Appliances |
Materials: 6/6 Nylon
Flammability Rating: 94V-2
Materials Temperature Index: 125°C Max. temperature on the part shall not exceed 105°C
NPT threaded style is liquid tight.
Consult Heyco for details. |
|
| “Quick Twist”Connectors |
Straight Snap-In For use with
Heyco-Flex Conduit and Tubing |
Straight NPT threaded For use with
Heyco-Flex Conduit and Tubing |
| Part No. |
Trade Sizes
in. |
Standard Carton Quantity |
Approx. Weight per 100 pcs. |
Part No. |
Trade Sizes
in. |
Standard Carton Quantity |
Approx. Weight per 100 pcs. |
| Black |
Gray |
Black |
Gray |
| 8515 |
8516 |
1/4 |
1000 |
20.0 |
8517 |
8518 |
1/4 |
1000 |
9.0 |
| 8485 |
8486 |
3/8 |
1000 |
11.0 |
8487 |
8488 |
3/8 |
1000 |
17.0 |
| 8490 |
8491 |
1/2 |
1000 |
9.0 |
8493 |
8494 |
1/2 |
1000 |
18.0 |
| 8495 |
8496 |
3/4 |
1000 |
15.0 |
8497 |
8498 |
3/4 |
1000 |
24.0 |
Sweep Snap-In For use with
Heyco-Flex Conduit and Tubing |
Sweep NPT threaded For use with
Heyco-Flex Conduit and Tubing |
| 8500 |
8501 |
3/8 |
1000 |
29.0 |
8502 |
8503 |
3/8 |
1000 |
25.0 |
| 8505 |
8506 |
1/2 |
1000 |
28.0 |
8507 |
8508 |
1/2 |
1000 |
25.0 |
| 8510 |
8511 |
3/4 |
1000 |
20.0 |
8512 |
8513 |
3/4 |
1000 |
20.0 |
|
Limited Warranty
The merchandise or products sold or distributed by Kaf-flex are warranted to our customers to be free from defects in material and workmanship at the time of shipment by us. Merchandise damaged as a result of carelessness, improper handling, rodents, insects (termite) or misapplication is specifically excluded from this warranty, as are all implied warranties, on any consequential injury, property damage and/or loss of profit which may be claimed to have occurred though the sales or use of any such product. All warranty claims shall be made within six (6) months after we have shipped the merchandise. Our liability hereunder is limited to the purchase price of any merchandise proving defective, or, at our option, to the replacement of such merchandise upon its authorized return to us. This warranty is in lieu of and excludes all other warranties, expressed, implied, statutory, or otherwise created under applicable law including, but not limited to, the warranty of mechantablility and the warranty or fitness for a particular purpose. In no event shall we be liable for special, incidental, or consequential damages, including loss of profits.
|
|
|